Skimboard On The Sand And Waves; Step By Step

The smallest of surfing styles, skimboarding is fast becoming more and more popular. It is known that the sport is centered out of California. It still though remains a sport with a very small following, and many prefer that. A skimboard that is a cross between a boogie board and a surf board; riders prefer them at mid-chest level.

There are two main ways to skim; skimboarding the sand being the preferred start out choice, which is preferred by the beginners. Most feel that it is far easier to skim on sand, as there is less volumes of water and because of this far more control. On the sand you are using the shallow tide water, so can usually ride for a lot longer.

First, start running along the sand as the tide pulls out. As you gain speed drop your board on to receding water. It is important not to jump on to the board at this point; this will most certainly cause you to fall. Instead, as you run put one foot just above the mid-point, then step on with the other.

When you feel more comfortable, try a wave. Again you will want to make sure you have the right board. Wave skimming boards are generally heavier than the sand skimming boards, however both will work. Immediately after a wave breaks on the shore begin your run towards the water.

It is much the same technique as before, though because of being further from the shore, it is important to be mindful of landmarks. Often times people using existing skateboarding skills when they first begin, but tricks can be learned and larger waves ridden.

Remember that no matter how well practiced at the skimboard you get, you will fall from time to time. To be fair, falling is all part of the fun and certainly part of the learning experience. As long as you expect to fall, it you can remain excited about the sport too of course; it's a challenge after all.